Massage & Bodywork

July | August 2014

Issue link:

Contents of this Issue


Page 49 of 141

I t p a y s t o b e A B M P C e r t i f i e d : w w w. a b m p . c o m / g o / c e r t i f i e d c e n t r a l 47 Bending Proper Mechanics to Avoid Back Pain By Barb Frye education When it comes to achieving pain-free body mechanics, we need to be aware of how we bend, since many of us spend a great deal of time working from a standing position. Bending the wrong way can potentially cause back pain or exacerbate a chronic back problem, so it's smart to have alternative approaches in mind. Here are a few options for troubleshooting back pain when bending. If you already have back problems, working at a low table and applying deep pressure is not wise. Instead, work with a higher table and offer only modalities that use a light touch. Once your back feels stronger, you can try returning to a lower table and deeper pressure, but first practice with a colleague to make sure your back is up for the task. Standing with one foot on a step or a block can help relieve back pain while bending. Experiment with different step heights, and with the step under your left or right foot, to find the best combination for you. It is usually the case that one position will help relieve tension where another position does not. Bending from the hips, knees, and ankles while keeping your back in a neutral position is a healthy strategy. If you are having a difficult time keeping your low back in a neutral position, try placing a piece of masking tape on your skin, down your lumbar spine, while standing upright. When you start to bend from your low back, the tape will pull and give tension, giving you tactile feedback. When you feel the tape begin to pull, simply stop and bring yourself back to a neutral standing position. Then, begin again with the intention of bending from your hip joints, knees, and ankles. With this kind of feedback, you will quickly learn how to feel the difference between bending from your low back versus your lower joints. BODY AWARENESS 1 SEATED BENDING EXERCISES Many therapists feel they must stand during their treatments. Remember, your comfort is the first priority. Sitting to work is always a good alternative when a standing position is simply too uncomfortable. The following exercises will help you find a comfortable and effective way to bend while sitting. Set your table low enough that you would be able to work on a client comfortably while sitting. Sit on your chair, vertically aligned, using your pelvis, thighs, and feet for support. Make sure your legs are wide enough apart so you can bend freely from your hip joints. Bend from the Hips. Begin to bend forward from your hip joints, keeping your spine in a neutral position. Bend just a little bit forward (Image 1) and then come back to a vertical position. Do this several times until you can easily bend forward with your upper body from your hip joints. If you feel yourself start to bend from somewhere in your back, stop and rest for a moment. Then, try again to bend from your hip joints. Take your time until this feels comfortable for you.

Articles in this issue

Links on this page

Archives of this issue

view archives of Massage & Bodywork - July | August 2014